Sid on the Hacks site writes up a good simple how to/tip – “My LCD display wouldn’t come on, it would just flicker. The LED on its external power supply was steady on when it wasn’t plugged into the monitor. When I did plug it in, the LED blinked at the rate of 2x per second. Measuring the power coming out of this supply using my multimeter, I saw that the power level wasn’t steady — it was pulsing slightly (about 2x per second). This was while unplugged from the monitor. Found a new power supply on eBay, and now everything’s fine.” Link. On a related note, the RSS feed on hacks site is awesome.
ADVERTISEMENT
