Quick n’ dirty pan-tilt camera mount

Robotics Technology

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

@garethb2

May 24th, 2009 6

Using little more than some PCBs from Sparkfun, two micro servos, some right angle headers and screws left over from a junked Gameboy, Jose Torres from RampageRobotics built this pan-tilt robot camera rig (with the help of a Dremel and a soldering iron). The CMOS camera module is from Electronics123.com. Clever use of the bent header pins to create a right-angle mount for the tilt-servo PCB.

Build a Pan-Tilt Camera Mount in Less Than an Hour