Crafting under pressure is irresistible.
The Lucien Yeomans “secret” that was almost lost.
Additional Materials Required: Thread tape Shaker motor Buy 1/2″ NPT Needle Valve (1) Buy 1/4″x12″ NPTM Hydraulic hose (1)Buy 1/2″x36″ NPTM Hydraulic hoses (2) SAE 4M to 1/4″ NPTF Swivel (1)Buy 1/2″ NPT Hex Nipple (2) Buy 1/2″ NPTF Tee (1) Buy 1/2″ NPTM to 1/4″ NPTF bushing Buy
This is the fifth of eight guides in a series documenting my build of MakerGear’s Mosaic desktop FDM/FFF 3D printer kit.
Sketchup Model Additional Materials Required: Roller Guides Soil Loading Drawer Wide Cylinder Supports Drawer Members 3/4″x2″ Bolts (16) 3/4″ Nuts (16) 3/4″ Washers (16) 1/2″ Washer (2) 1/2″ Lock Washer (2) 1/2″ Nut (2)
Sketchup Model Additional Materials Required: Thin Cylinder Supports Magnet Holder Sensor Holder Leg Holders (2) 3/4″ Galvanized Nuts (3)
Additional Materials Required: Soil Loading Drawer Wide Cylinder Supports 3/4″x2″ Bolts (8) 3/4″ Galvanized Nuts (8)
Sketchup Model Additional Materials Required: The Prepared U-Channel Wide Cylinder Supports 3/4″x2″ Bolts (16) 3/4″ Galvanized Nuts (16) 3/4″ Washers (16)
Sketchup Model Additional Materials Required: The Press Feet 1/4″ to 1/2″ Bushing (2) 1/2″ NPTM to 1/2″ NPTF Elbow (2) 1/2″ Hex Nipple (2) 1/2″ Quick Coupler Set (1) 3/4″ Galvanized Nuts (2) 3/4″ Steel Nuts (1)
Sketchup Model
Sketchup Model Additional Materials Required: 3/4″ Galvanized Nuts (4) 3/4″ Steel Nuts (10)
