Sam writes “Relive the better days with this NES Controller that has been modified into a cellphone. Everything is original – the buttons and casing. This modification uses a Nokia 3200 radio and electronics because it’s so easy to get the casing off and get to the good stuff. This is probably the only phone […]
Tim took an old Brunswick A-2 pinsetter he bought off of ebay and put it in his garage! – Link.
John writes “I always thought mechanical watches came from hi-tech factories. Ron DeCorte shows how he made one by hand (OK, it took several months). Be sure to surf the rest of DeCorte’s site for interesting views of what’s inside expensive Swiss watches.” – Link.
Here’s another homemade welding set up using batteries – Spelljammer writes “I bought my pulser desulfator and managed to repair 3 car batteries. I hooked them up in series and use them as an arc welder. I’ve never welded before so its been quite the experience but I’m starting to get the hang of it. […]
Michael writes “How to make an (electrical) cable release for the Canon Digital Rebel and how to trip the camera’s shutter with your computer’s serial port. Applicable also to some other Canons (e.g., Digital Rebel XT).” – Link.
Byron writes “After seeing the inspiring portable glass blowing studio and the Crucible’s fire truck of fire at the Maker Fair, I found an interesting Make… take away style. A improvised battery welder made with 3 12v batteries and a few jumper cables make it easier to share Making or may save you in a […]
Mypk8 posted up this great modded bicycle – “Created from an old Schwinn tandem – I think it was a Varsity. I cut it up and added a drafting table leg for the down tube. Then filled the holes in with bondo to give it a spine sort of look. I used the triple trees […]
