Ray and Cape write “We thought it’d be sweet to make shot glasses out of ice. There are some bars in Europe and Australia which are made completely out of ice and kept below freezing, we didn’t go that far but these are pretty cool (no pun intended), check it out. We used Dixie cups. They come in several different sizes. You will need two different sizes, we used 9 oz and 3 oz cups…” Link.
Interesting article from the NYTimes about Cafepress (you can make your own shirts with their service) – “Many people used to make their own clothes and build their own furniture. The Industrial Revolution, with technological innovations like power looms and power lathes, and now today’s far-flung supply chains, made it easier and more practical to buy ready-made apparel and housewares. Lately, however, mass production has been cast not so much as the best thing that ever happened to consumers but as an annoyance, even a problem. It stands in the way of our individuality. What can save us?”… Link.
Nice mod if you have an old Dreamcast laying around, Raph writes – “The image on a TV is always a little too blurry for my taste, and the quality of a VGA image is very superior. I had always dreamed to be able to use my SNES on a PC monitor, but the SNES did not have a VGA output. When I learned that the Dreamcast could output a VGA signal, I installed a VGA connector on it almost instantly.” [via] Link.
300 hours and approximately 130 wood joints to build, Nicholas Falzone’s excellent case mod “The Sangaku case mod a fusion of computer technology with Japanese the furniture-making tradition. Sangaku translates to “mathematics tablet” in Japanese. The top connects the sides, with the shorter pieces lining up with the lines from the doors and the acrylic strip carrying the black from the front of the case up and over through the back. The two sides started out being four sliding shoji doors, two per side, but to get the lighting to work, I combined the two on one side. The joinery on the doors was made almost entirely by hand, using Japanese chisels and a dozuki saw.” [via] Link.
In MAKE 01 we have a great soldering primer, here’s another to check out from the Edinburgh Engineering Virtual Library. “This written guide will help beginners and novices to obtain effective results when soldering electronic components. If you have little or no experience of using a soldering iron, then EPE recommends that you practice your soldering technique on some fresh surplus components and clean stripboard (protoboard), before experimenting with a proper constructional project. This will help you to avoid the risk of disappointment when you start to assemble your first prototypes. If you’ve never soldered before, then read on!” Link.
MAKE Instructable group member Radiorental made a really nice laptop bag from 1/4″ thick antistatic workbench rubber mats – “Materials are irrelevent. I wanted a slightliy durable material and opted for this 1/4″ thick antistatic workbench rubber mat. Some neoprene for the parts of the bag that will directly cover the laptop to provide some shock absorbsion and a combination velcro & tarp snap for fastning.” Nice work! Link.
Handy how to on making printed circuit boards, Incepinar writes – “I spent a lot of time to find an easy to use PCB drawing program and failed. (Believe there should be lots of but it’s just me can’t find it!) All of them I came across were either so professional or hard to handle. So, in admiration of the AMIGA’s Deluxe Paint, I decided to use Windows’s Paint program to create my own PCBs. All I needed was it’s copy and paste functionality. Thus any other drawing editor on any Operating System may be utilized for the following work style that I currently (and will continue to) use.” Link.
