DIY Projects

How-To: Homemade sunscreen

How-To: Homemade sunscreen

Scoochmaroo shares this recipe for basic sunscreen free of the umpteen additives used in commercial varieties. Sunscreen is intended to shield your skin from harmful UVA and UVB rays. These can cause premature aging, and more tragically, skin cancer. But commercial suncreens often involve more nasty chemicals than necessary. By making your own sunscreen, you […]

Motorcycle brake rotor repair kludge

Motorcycle brake rotor repair kludge

Drilled and tapped for the screw and drilled a clearance hole for the mount bolt.At 20 threads per inch, that would be .050″ per turn. So .01″ would be 1/5 of a turn. Put on a standard six-flat nut for reference. Turn less than one flat would be .050/6 = .0083 inches, a little margin to the spec.

So, to use it, you spin and gradually drop the screw until it just touches at the highest point. Turn to the lowest point, and tighten down. Took less than one flat, so I believe I am in spec!