The MTM Snap was designed by Jonathan Ward of MIT’s Center for Bits and Atoms. It costs about $500, runs off an Arduino, is CNCed out of HDPE, and can mill a 5″ x 3″ x 1.75″ area. Design files and BOM are available if you want to make your own. [Via the Arduino blog]
I treat knives as the second most dangerous implements in the average kitchen. (Microplanes and mandolins hold the top spot.) When using a knife, I’m always thinking about the “failure mode.” If it slips, or something goes wrong, how is it going to go wrong? Where is the knife going to go if it does slip? How can I use the knife and position myself such that if an exception does occur, it isn’t fatal? Of course, getting a good, clean cut and keeping the knife in good working order are also important.
In this second Skill Builder installment on Kitchen Equipment, Cooking for Geeks author Jeff Potter discusses more essential tools and their use. Next up: Knife play! -Gareth Measuring Cups and Scales In addition to the common items used for measuring (e.g., measuring cups and spoons), I strongly recommend purchasing a kitchen scale. If you will […]
In this installment of Food Skill Builder, our guest geek chef, Jeff Potter, discusses some essential kitchen tools (ooh… tools) and tips for their proper use. In part 2 (tomorrow), we’ll look at measuring, timing, weighing, storing and similar tools. And, some knifing techniques! -Gareth Regardless of your needs, a well-equipped home kitchen shouldn’t cost […]
Discover the inner workings of a mortise and cylinder lock, first developed by the Egyptians over 4000 years ago, with the Beginners Lock-Picking Blend by TOOOL (The Open Organization Of Lock-pickers). Each set contains 8 hand-picked tools that will get you on your way to opening a variety of different locks.
Mississippian Hillar Bergman is known, first and foremost, as a musician—he plays the fiddle. His YouTube channel, as catinnahat, has several videos describing his wonderful “apocalyptech” potter’s wheel, and demonstrating his skillful use thereof. It’s just an old wheel and tire, mounted on an oak stump with a pair of pipe flanges and a short nipple, and spun up to speed with a tire iron stuck through the holes in the hub.
I’ve found that magnetic pin cushions are much handier than fabric ones, but they are usually big, bulky, plastic and unattractive. I love this brilliant idea from Skip to My Lou for transforming a beautiful dish into a magnetic pin holder!
