Sharpie Pen Plotter
Check out this Sharpie plotter attachment for the Phlatprinter CNC kit cutter. Even though it requires a manual pen swap, it’s still mesmerizing to watch it plot in image.
Tools
Tool Review: Technician’s Pocket Screwdriver
I have roughly one zillion screwdrivers at my disposal most of the time. I’ve got a few sets of general purpose screwdrivers, many small jewelers and electronics screwdrivers, and even some nice ones attached to Swiss Army knives and Leatherman multi-tools. But the one I use most for servicing small electronics is my Technician’s Pocket Screwdriver
In the Maker Shed: Peggy 2 LED display kit
Peggy 2 is an updated version of the original Peggy light-emitting pegboard display. Version 2 adds simple animation capability and Arduino compatibility.
CRAFT Flickr Pool Weekly Roundup
This week in the CRAFT Flickr pool we saw: Iron Craft Challenge- A Dress for Kate, by katbaro, The Aviator, by Super Doily, and Pippi and Mr. Nelson, by helenpriem.
How-To: Set Up An Electronics Lab
Dave Jones from the Electronics Engineering Video Blog shows us what tools he recommends for a starter electronics lab. He makes a few surprisingly inexpensive recommendations for multimeters, oscilloscopes, function generators, bench power supplies, soldering stations, and many other tools and supplies. I, for one, am taking very careful notes on this excellent video since […]
Top 10: Bike Repair
We have covered a lot of bike-related content over the years, and a lot of bike-repair-related content. Trouble is, we don’t have a separate repairs-only category, so assembling this round-up required manual cherry-picking from the many pages of our Bicycle category archive. I then picked my ten favorites, tabulated the pageviews for each, and counted the days since it was posted, and divided to get an average-traffic-per-day figure for each post. So this is probably my most scientifically-organized Top 10 to date. I hope you enjoy it. Happy Friday!
Tool Review: Robert Larson 800-2875 Center Finder
If you’ve ever struggled to locate the center of a circular plate or a piece of round stock using a ruler or a square, you know it can be a tricky proposition. My usual ham-fisted method involves marking the midpoint of several diameters and kind of visually averaging all those sloppy centers to get roughly in the middle of the thing. If I need more accuracy, I try to sandwich the circle between two framing squares and then draw lines between opposing corners–lines which, at least in theory, should bisect each corner at 45 degrees and intersect in the middle of the circumscribed circle. In theory.